How to Get an SSL Certificate for Your Website
By MinniHost Guides Editorial Team Review by MinniHost Guides Editorial Team Last checked Posted Topic: SSL & HTTPS
To get an SSL certificate, first check whether your host already issues one for your domain, because many do automatically. If not, either run an ACME client such as one that works with Let's Encrypt, or buy a certificate by sending a certificate signing request to a certificate authority. Then install it, redirect HTTP to HTTPS, fix mixed content and confirm the result.
Part of our guide: What Is an SSL Certificate? How HTTPS Works
General information, not professional security or financial advice. Check your host’s and certificate authority’s current documentation; steps differ by provider.
You can get an SSL certificate in one of two ways: let software request it automatically, or buy one from a certificate authority. Most small sites should start by checking what the host already provides. This guide builds on what an SSL certificate is and walks through each route, installation, forcing HTTPS and WordPress. MinniHost Guides is an independent editorial site; it does not sell hosting or certificates.
How do I check whether my host already provides one?
Look in your hosting control panel and in your browser. Open your site with https:// and look for a warning; then open the panel’s SSL/TLS section. cPanel’s SSL/TLS Status page, for example, lists each domain with its certificate status, filters for domains AutoSSL includes or excludes, and shows an error if one exists. If a valid certificate is already installed and renews itself, you may have nothing more to do except verify it.
If the panel reports a problem with a domain, the cause is often that the domain does not resolve to the server. Fix that first, or contact your host.
Option 1: how do I get one automatically?
Use your host’s automatic feature, or run an ACME client yourself. ACME, specified in RFC 8555, lets software prove control of a domain and collect a certificate with no manual steps. Let’s Encrypt, a nonprofit authority, uses it and charges no fee; see Let’s Encrypt explained.
The steps with an ACME client are:
- Pick a client from the list that your certificate authority publishes.
- Make sure the domain points at the server and, for the HTTP-01 check, that port 80 is reachable.
- Run the client for your domain names and choose a challenge. Wildcards need DNS-01.
- Let the client install the certificate or write the full chain file for your web server.
- Confirm a scheduled renewal job exists.
Option 2: how do I buy one from a certificate authority?
Generate a key and a certificate signing request, send the request, pass validation and install what you get back. What a CSR is explains the file. In outline:
- Generate a private key and CSR in your control panel or with OpenSSL. Keep the key private.
- Choose a certificate type; SSL certificate types compares them.
- Submit the CSR and complete the validation the authority asks for.
- Download the certificate and the CA bundle (intermediate certificates).
- Install them as below, using the private key that matches the CSR.
How do I install it?
In cPanel, use the Install and Manage SSL for your site (HTTPS) interface. The documentation lists three ways to fill it in: browse certificates, search by domain with Autofill by Domain, or enter the certificate (CRT), private key (KEY) and optional CA bundle (CABUNDLE) by hand, then click Install Certificate. cPanel also states that you must have a private key before you generate a signing request, and that a lost key cannot be recovered. It reserves self-signed certificates for intranet use, so public sites should use a certificate from a trusted authority.
On other servers the pattern is the same: point the web server at the certificate file (including intermediates) and the key file, then reload it. Follow your server software’s documentation.
How do I verify the install?
Check from more than one place. Use the browser-based certificate checker, which runs in your browser and sends nothing to us, and a command-line tool. Look for the right names, an expiry date in the future and a complete chain; see the certificate chain. If a tool says “unable to get local issuer certificate”, read that error’s guide.
How do I force HTTPS and fix mixed content?
Redirect http addresses to https and make sure every resource on the page loads over https. Let’s Encrypt recommends serving HTTP on port 80 and HTTPS on port 443 and redirecting port 80 to HTTPS, and says that an open port 80 does not add attack surface.
Mixed content is a secure page that loads insecure resources. MDN says browsers auto-upgrade images, video and audio requests from HTTP to HTTPS and block insecure requests for all other resource types, such as scripts and stylesheets. Its advice is to serve all the content as HTTPS: make references to your own resources relative or https:// links, and use the browser console, which shows warnings when mixed content is upgraded or blocked, to find the ones that remain.
What is different for WordPress?
WordPress needs its addresses and admin settings to use https once the certificate works. The WordPress developer documentation says SSL must already be configured on the server and says you may wish to set the WordPress URI in options to https, mainly so some plugins work, and describes defining the FORCE_SSL_ADMIN constant in wp-config.php, not in a plugin file. If SSL ends at a proxy while WordPress itself runs over HTTP, the documentation warns of redirect loops and shows reading the HTTP_X_FORWARDED_PROTO header. That page is old and notes its Apache rewrite rules may not fit current WordPress versions, so test any changes. Back up the site first. Our WordPress hosting guide covers hosting types more broadly.
How do I make sure it renews?
Renewal is part of getting a certificate. The 200-day maximum for new public certificates falls to 100 days in 2027 and 47 days in 2029, so manual renewal gets harder. Read renewing an SSL certificate and set up automation or reminders on day one.
What not to do
- Do not paste your private key into any website, chat or ticket, including our checker.
- Do not use a self-signed certificate on a public site.
- Do not disable certificate verification in a tool to hide a warning.
Sources re-opened and compared with this text by the MinniHost Guides team on 2026-11-17. The team holds no engineering licence or vendor certification. cPanel and WordPress are trademarks of their owners; this site is not affiliated with them.
Your questions answered
How do I get an SSL certificate for my website?
Check your hosting control panel first, because many hosts issue a certificate automatically. If yours does not, use an ACME client to get a free domain-validated certificate from a service such as Let's Encrypt, or generate a certificate signing request and buy a certificate from a certificate authority. Whichever route you pick, install it and then verify the result.
How long does it take to get one?
Automatic issuance needs no human approval, because the ACME client proves control of the domain and collects the certificate itself, so the wait is mainly setting the client up and passing validation. Purchased certificates depend on the vendor and the validation level, since organization checks involve the authority reviewing details. Ask the vendor for its current timescale.
Do I have to pay for an SSL certificate?
Not necessarily. Let's Encrypt states that it charges no fee for its certificates, and many hosts include automatic certificates. You may pay for a certificate if you want organization validation or a vendor support arrangement. We list no prices because they change; ask the vendor for a dated quote and see what your host provides.
How do I install an SSL certificate in cPanel?
In cPanel, open the Install and Manage SSL for your site (HTTPS) interface, choose the domain, and enter the certificate, the private key and the CA bundle if your authority supplied one, or use Autofill by Domain. Then click Install Certificate. The key must come from the same pair that created your request. Control panels differ, so check your host's documentation.
How do I know the install worked?
Open your site with https in the address bar and check that the browser shows no warning. Then confirm what the server sends, including intermediates, using the SSL certificate checker or the OpenSSL s_client command, and test from a command-line tool as well. Finally check that http addresses redirect to https and that no page loads insecure content.
Where this comes from
- Let's Encrypt: Getting Started and FAQ (letsencrypt.org)
- Let's Encrypt: How It Works (letsencrypt.org)
- RFC 8555: Automatic Certificate Management Environment (ACME) (rfc-editor.org)
- cPanel documentation: SSL/TLS (docs.cpanel.net)
- cPanel documentation: SSL/TLS Status (docs.cpanel.net)
- WordPress developer documentation: Administration Over SSL (developer.wordpress.org)
- MDN: Mixed content (developer.mozilla.org)
- MDN: Transport Layer Security (TLS) (developer.mozilla.org)
- What Is an SSL Certificate? How HTTPS Works
An SSL certificate links a website's public key to its domain name so browsers can encrypt traffic and check who they reach. How it works, what it proves
- Let's Encrypt: Free SSL Certificates Explained
Let's Encrypt issues free, automated, domain-validated SSL certificates. How ACME issuance and renewal work, the limits, and how free compares with paid.
- How to Renew an SSL Certificate Before It Expires
Renew an SSL certificate before it expires: check the end date, fix failed automatic renewals, renew a purchased one and plan for shorter lifetimes.
- What Is an SSL Certificate Chain? Root and Intermediate
An SSL certificate chain links your site's certificate through intermediates to a trusted root. What to send, common errors and how to fix them.
- SSL Certificate Types: DV, OV, EV, Wildcard, SAN
SSL certificate types differ in validation (DV, OV, EV) and coverage (single, wildcard, multi-domain SAN). Compare them and see which suits a small site.
- Fix: "Unable to Get Local Issuer Certificate"
The error "unable to get local issuer certificate" means a client cannot find a certificate's signer. Learn which side is at fault and fix it safely.